60-0045
MCS51 series and Atmel AVR microcontrollers ISP capable fast programmer
Short description:
5515 supported devices by 2.34 version of SW (Jan. 12, 2007)
small, very fast and powerful portable programmer of MCS51 series and Atmel AVR microcontrollers
in-circuit serial programming (ISP) capability included
full-speed programming of serial EEPROM (IIC, Microwire and SPI interface)
DIL40 ZIF socket, all MCS51/AVR chips in DIL package up to 40 pins are supported without adapters
connection to PC: USB port
USB 2.0 full speed and USB 1.1 compatible
upgradeable to SmartProg2 programmer.
comfortable and easy to use control program, Windows compatible
free SW update, download from Internet
power supply, cable and software included
approved by CE laboratory to meet CE requirements
Features
GENERAL
New generation of Windows 98/Me/NT/2000/XP/2003/XPx64/Vista based ELNEC specialized programmers. Programmer is capable to support all currently available microcontrollers of the MCS51 series (up to 40 pins) and the AVR microcontrollers (8-40 pins) using parallel and serial algorithms. T51prog2 has been developed in close cooperation with Atmel W&M., therefore programmers hardware is focused to support all current and future microcontrollers of Atmel W&M MCS51 family.
T51prog2 is a small, very fast and powerful portable programmer for MCS51 series and Atmel AVR microcontrollers. T51prog also programs serial EEPROM with IIC (24Cxx), Microwire (93Cxx) and SPI (25Cxx) interface types. Using build-in in-circuit serial programming (ISP) connector programmer is able to program MCS51 family microcontrollers and Atmel AVR microcontrollers using serial algorithms.
Provides very competitive price with excellent hardware design for reliable programming. Nice value for money in this class.
Very fast programming due to high-speed FPGA driven hardware and support of high-speed USB port. Surely faster than competitors in this category.
T51prog interfaces with the IBM PC compatible or higher, portable or desktop personal computers through USB port.
T51prog2 is easy upgradeable to SmartProg2 programmer using upgrade kit Xprog2 to SmartProg2 (ord.no. 60-0048).
HARDWARE
40 powerful TTL pindrivers provide H/L/pull_up/pull_down and read capability for each pin of socket. Advanced pindrivers incorporate high-quality high-speed circuitry to deliver signals without overshoot or ground bounce for all supported devices. Pin drivers operate down to 1.8V so you be ready to program the full range of todays advanced low-voltage devices.
The programmer performs device insertion test (wrong device position in socket) and contact check (poor contact pin-to-socket) before it programs each device. These capabilities, supported by signature-byte check help prevent chip damage due to operator error.
T51prog2 programmer performs programming verification at the marginal level of supply voltage, which, obviously, improves programming yield, and guarantees long data retention.
Various socket converters are available to handle device in PLCC, SOIC, SSOP, TSSOP, TQFP, QFN (MLF) and other packages.
SOFTWARE
Programmer is driven by an easy-to-use control program with pull-down menus, hot keys and on-line help. Selecting of device is performed by its class, by manufacturer or simply by typing a fragment of vendor name and/or part number.
Standard device-related commands (read, blank check, program, verify, erase) are enhanced by some test functions (insertion test, signature-byte check), and some special functions (autoincrement).
All known data formats are supported. Automatic file format detection and conversion during loading of file.
The rich-featured autoincrement function enables one to assign individual serial numbers to each programmed device - or simply increments a serial number, or the function enables one to read serial numbers or any programmed device identification signatures from a file.
The software also provide a many information about programmed device. As a special, the drawing of all available packages are provided. The software provide also explanation of chip labelling (the meaning of prefixes and suffixes at the chips) for each supported chip.
The software provide a full information for ISP implementation: Description of ISP connector pins for currently selected chip, recommended target design around in-circuit programmed chip and other necessary information.
CARE FOR THE CUSTOMERS
It is important to remember that support of new devices with compatible GND/VCC/VPP pinout requires only a software update due to the T51prog2 hardware. With our prompt service you can have a new device added to the list of supported devices within hours! Free software updates are available by download from our WEB site. Keep-Current and AlgOR services, our next step towards customer satisfaction.
Keep-Current service means, that ELNEC ships the latest version of programmer software and updated user documentation (Keep-Current package) to customer . The Keep-Current service is your hassle-free guarantee that you are achieving the highest quality programming on ELNEC programmers, at minimal cost.
AlgOR (Algorithm On Request) service gives the user a tool to influence to amount and types of programmed devices as needed.
Specification
HARDWARE
Programmer
two D/A converters for VCCP and VPP, controllable rise and fall time
VCCP range 2V..7V/350mA
VPP range 2V..25V/200mA
USB 2.0/1.1 compatible interface
autocalibration
selftest capability
ZIF socket, pindriver
40-pin DIL ZIF (Zero Insertion Force) socket accepts both 300/600 mil devices up to 40-pins
pindriver: 40 TTL pindrivers, specialized GND/VCC/VPP pindriver for MCS51 and AVR devices
spare GND, VCC and VPP driver, which add additional made-by-wire GND/VCC/VPP pin capability for future devices
FPGA based TTL driver provides H, L, CLK, pull-up, pull-down on all pindriver pins, level H selectable from 1.8 V up to 5V
continuity test: each pin is tested before every programming operation
ISP connector
10-pin male type with missinsertion lock
6 TTL pindrivers, provides H, L, CLK, pull-up, pull-down; level H selectable from 1.8V up to 5V to handle all (low-voltage including) devices.
1x VCCP voltage (range 2V..7V/100mA) (*1) and 1x VPP voltage (range 2V..25V/50mA)
programmed chip voltage (VCCP) with both source/sink capability and voltage sense
(*1) - the programmer is not capable to supply a target system from VCCP pin. If you have such demand, use please a BeeProg programmer
DEVICE SUPPORT
Programmer, in ZIF socket
microcontrollers MCS51 series: 87Cxxx, 87LVxx, 89Cxxx, 89Sxxx, 89LVxxx, LPC series from Atmel, Atmel W&M, Intel, Philips, SST, Winbond, ... 8-40 pins (*1)
microcontrollers Atmel AVR: ATtiny, AT90Sxxx, ATmega series (parallel and serial mode), 8-40 pins (*1)
Serial E(E)PROM: 24Cxxx, 24Fxxx, 25Cxxx, 59Cxxx, 85xxx, 93Cxxx series
Programmer, through ISP connector
Microcontrollers Atmel: AT89Sxxx, AT90Sxxxx, ATtiny, ATmega series
Microcontrollers Philips: LPC series
Notes:
(*1) - suitable adapters are available for non-DIL packages and devices with more than 40 pins.
for all supported devices see actual DEVICE LIST
SOFTWARE
Algorithms: only manufacturer approved or certified algorithms are used. Custom algorithms are available at additional cost.
Algorithm updates: software updates are available approx. every 4 weeks, free of charge.
Main features: revision history, session logging, on-line help, device and algorithm information.
Device operations
standard:
intelligent device selection by device type, manufacturer or typed fragment of part name
blank check, read, verify
program
erase
configuration and security bit program
illegal bit test
checksum
security:
insertion test
contact check
ID byte check
special:
auto device serial number increment
statistic
count-down mode
Buffer operations:
view/edit, find/replace
fill, copy, move, byte swap, word/dword split
checksum (byte, word)
print
File load/save:
no download time because programmer is PC controlled
automatic file type identification
Supported file formats
unformatted (raw) binary
HEX: Intel, Intel EXT, Motorola S-record, MOS, Exormax, Tektronix, ASCII-SPACE-HEX
PC system requirements
Common, software related requirements
Programmer hardware related requirements:
one USB port
Operation
operating voltage 15..20V DC, max. 0.5A
power consumption max. 6W active, about 1.4W sleep
dimensions 160x95x35 mm (6.3x3.7x1.4 inch)
weight (without external power adapter) ca. 500g (17.65 oz)
temperature 5°C ÷ 40°C (41°F ÷ 104°F)
humidity 20%..80%, non condensing
Base configuration package includes
T51prog2 programmer
wall plug adapter, 15V DC/500mA, unstabilized
connection cable PC-programmer
ISP cable
diagnostic POD for selftest of the programmer
anti-dust cover for ZIF socket
user manual
software
registration card
transport case
